Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections. IMPORTANT: Only compatible with correct software version.

Dear Zoe, I just received my RT3. I download and installed the CPS 1.30 and USB driver on Windows7, but when connecting to the PC, there is no way to read or write CPS paramters to the RT3. In the periphericals, i see well “STM Device in DFU Mode” under USB controlers (2 files are in details: “C: Windows system32 DRIVERS klfltdev.sys (from Kaspersky Lab ZAO) and C: Windows system32 drivers STTub30.sys (from STMicroelectronics version 3.0B) The RT3 Firmware is D013.009, CPS 1.30. Is my problem linked to the Program Radio password? Is there a default password to be entering here?

IMPORTANT: Only compatible with correct software version. How do you know if you have the correct software version? 1) Turn on the device 2) Press the MENU button until the extended menu 3) Select DEVICE DESCRIPTION 4) The software version is displayed If your software version exceeds 5.5 or 6.6, then update the software. If your system is not updated, we advise you to order this version These CDs are suitable for the following Citroen. The map updates are new roads, junctions, ring roads, interchanges and millions of other changes included.

Peugeot/Citroen/Fiat RT3 maps 2016-2017 maps free download at GPSarchive.com. Citroen - navigation maps. Hello Sign in. In order to identify the audio/navigation system software version. NaviDrive RT3. Apr 25, 2016  2015/2016 - NaviDrive RT3 NaviDrive RT3 SW Version 6.63 NaviDrive RT3 SW Version 5.52 EUROPE RT3 EUROPE.

My FW is D 002.034 and V 01.32. I don’t want to brick the tr3 and when I read the instructions With this both firmwares I cannot upgrade tot the newest FW. So I read it seams to be that I must first upgrade to the FW D3.08 and after that to FW D13.14. Please tell me or I am right and if so can you send me the FW D 3.08 wich seems to be needed to start the upgrade in my case. Thank you for your attention and support. Dirk from Germany (RT8 VHF GPS, 13.32) Hi Zoe, I have a few suggestions for improvement. A current problem is that the warning tone volume can not be changed.

To help you find what Navigation system you have we have created the following listings guide. From here you should be able to recognise the correct system for your vehicle.

I have noticed while scanning analog channels, the radio behaves like I have priority scan set (transmissions are interrupted for about 0.5 seconds every 2 seconds). I have not set priority scan at all.

I also repair Peugeot / Citroen sat nav systems, RT3, RT4, RT5, and RT6. Full instructions and after sales support available. Download from here.

How do you know if you have the correct software version? 1) Turn on the device 2) Press the MENU button until the extended menu 3) Select DEVICE DESCRIPTION 4) The software version is displayed If your software version exceeds 5.5 or 6.6, then update the software. If your system is not updated, we advise you to order this version Download: RT3 2016-2017 Italy.iso RT3 2016-2017 Scandinavia.iso RT3 Central Europe 2016-2017.iso RT3 Eastern Europe (North-East) 2016-2017.iso RT3 Eastern Europe (North-West) 2016-2017.iso RT3 Eastern Europe (South) 2016-2017.iso RT3 FRANCE 2016-2017.iso RT3 GERMANY 2016-2017.iso RT3 GREAT BRITAIN – IRELAND 2016-2017.iso RT3 SPAIN – PORTUGAL 2016-2017.iso TR3benelux17-16.rar Download from here.

For this new update, for example, more than 35,000 roundabouts, 34,000 street names, 19,000 one-way streets and turn restrictions 235,000 added or changed. Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections. IMPORTANT: Only compatible with correct software version.

Please press and hold down the menu button on your RT3 unit to check your software version. • Switch the power on • Hold down the MENU button until you get the extended menu • Select DEVICE DESCRIPTION • The software version will then appear If you have software 5.x then you will require the VAN BUS interface. (Not work with YTM06-RD3 or YTM05-RD3 because connectors are not compatible) If you have software 6.x then you will require the CAN BUS interface: or VAN= RDS = version 5. CAN= LIST= version 6.

The map updates are new roads, junctions, ring roads, interchanges and millions of other changes included. Each road section has up to 260 characteristics, such as the number of lanes or information on one-way roads. These should all be updated, in addition to the extensive list of points of interest. For this new update, for example, more than 35,000 roundabouts, 34,000 street names, 19,000 one-way streets and turn restrictions 235,000 added or changed. Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections.

Hey Zoe, first of all – thanks for the fast and professional replay by sending full rt3 & rt8 firmware packages within 12h – phantastic service – the big Japanes and German competitors could learn a lot from you and your company. Also your patience with the, sometimes stupid hamradio geeks is really nice. Pleae allow one more question: Firmware update proceeded with out any error message. Firmware info changed from D002.034 to D003.008. Independent the topic with non working 1750 Hz tone is still open.

Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections. IMPORTANT: Only compatible with correct software version. How do you know if you have the correct software version? 1) Turn on the device 2) Press the MENU button until the extended menu 3) Select DEVICE DESCRIPTION 4) The software version is displayed If your software version exceeds 5.5 or 6.6, then update the software. If your system is not updated, we advise you to order this version Download: RT3 2016-2017 Italy.iso RT3 2016-2017 Scandinavia.iso RT3 Central Europe 2016-2017.iso RT3 Eastern Europe (North-East) 2016-2017.iso RT3 Eastern Europe (North-West) 2016-2017.iso RT3 Eastern Europe (South) 2016-2017.iso RT3 FRANCE 2016-2017.iso RT3 GERMANY 2016-2017.iso RT3 GREAT BRITAIN – IRELAND 2016-2017.iso RT3 SPAIN – PORTUGAL 2016-2017.iso TR3benelux17-16.rar Download from here.

Dear Zoe, I just received my RT3. I download and installed the CPS 1.30 and USB driver on Windows7, but when connecting to the PC, there is no way to read or write CPS paramters to the RT3. In the periphericals, i see well “STM Device in DFU Mode” under USB controlers (2 files are in details: “C: Windows system32 DRIVERS klfltdev.sys (from Kaspersky Lab ZAO) and C: Windows system32 drivers STTub30.sys (from STMicroelectronics version 3.0B) The RT3 Firmware is D013.009, CPS 1.30. Is my problem linked to the Program Radio password?

Pleae allow one more question: Firmware update proceeded with out any error message. Firmware info changed from D002.034 to D003.008. Independent the topic with non working 1750 Hz tone is still open. With the programming software it is possible to assign the 1750 Hz. Function to the side buttons, but independent how to use – before – while – after pushing PTT button no tone appear in a second device on any mode ( digital / analog ). Actually i believing on two possibilities: a.) the problem sits in fron of the device and it`s not able to find the right using advices in internet and manual.

Dear Zoe Thank you for the quick response. I have downloaded the file and found in the files 2 fw upgrades one to the old vocoder and one to the new. My FW is D 002.034 and V 01.32. I don’t want to brick the tr3 and when I read the instructions With this both firmwares I cannot upgrade tot the newest FW.

Also, if your car is equipped with radio controls on the steering wheel you can use them to access the functionality described above. All this with the utmost discretion: no wires around the car!

My FW is D 002.034 and V 01.32. I don’t want to brick the tr3 and when I read the instructions With this both firmwares I cannot upgrade tot the newest FW. Download gta romania 2 remus. So I read it seams to be that I must first upgrade to the FW D3.08 and after that to FW D13.14. Please tell me or I am right and if so can you send me the FW D 3.08 wich seems to be needed to start the upgrade in my case.

In fact, in the menu I can only find “Zone”. Questions: 1. Do you have an updated USB driver version for WIN10 systems (64bit)?

Firmware Update preparations 1.Know your vocoder versions. And that’s why your radio kept repetitive starting when you choose the unmatched version.See how to check about it below: Open your radio,Click “Utilities”–”Radio Infor”–”Versions”. Then it will show the vocoder version Infor of this radio. And just take a RT3 as an example: 2. After you download the Firmware on, please read the note before updating firstly, It will help you choose the suited vocoder versions. Operation Steps Still take this RT3 as an example,see attached pictures below: 1.Open the Firmware file,click the red part “Upgrade”.

I would like to try the latest firmware to see if this fixes these issues. I am aware of the risks. Thank you in advance, and have a great day! Dear Zoe Thank you for the quick response. I have downloaded the file and found in the files 2 fw upgrades one to the old vocoder and one to the new.

• Masking feature enhanced with the introduction of rectangular and elleptical masks. • Layer Dimensionality effect introduced. Sony vegas 13 32 bit. • Introduction of proxy editing mode.

Touch Screen 7' with MirrorScreen (SMEG+IV2) The following elements identify this system: - Similar front panel to Touchscreen 7”. - The map is loaded using a USB.

My FW is D 002.034 and V 01.32. I don’t want to brick the tr3 and when I read the instructions With this both firmwares I cannot upgrade tot the newest FW. So I read it seams to be that I must first upgrade to the FW D3.08 and after that to FW D13.14. Please tell me or I am right and if so can you send me the FW D 3.08 wich seems to be needed to start the upgrade in my case. Thank you for your attention and support.

Have i broke the disc loader as it won’t eject. Try’d reboot by holding DARK button for so many seconds if i have damaged the unit can it be repaired or can i put a different unit in or has the head unit got to be sink’d with the car and tha screen?????? Help please, i am really lost on this. Plus only had the car 3 weeks:((.

Each road section has up to 260 characteristics, such as the number of lanes or information on one-way roads. These should all be updated, in addition to the extensive list of points of interest. For this new update, for example, more than 35,000 roundabouts, 34,000 street names, 19,000 one-way streets and turn restrictions 235,000 added or changed.

Dirk from Germany (RT8 VHF GPS, 13.32) Hi Zoe, I have a few suggestions for improvement. A current problem is that the warning tone volume can not be changed. It would be good if at least 2 or 3 volumes were possible. But also the display brightness should be adjustable. It’s just too light in the dark. The firmware of the devices should be freely downloaded on a website.

Paul I got a 2007 citroen c5 with the navidrive. A while back the screen went blank, and then no satnav, stereo, phone or anything elese.

Xcarlink connects directly to the CD changer port on the back of your car stereo and can be hidden in one of the storage compartments. No FM broadcast audio: direct connection assures the highest quality audio and excludes any interference due to an internal circuit filter. The latest version of XCARLINK is also equipped with BT port / AUX IN which allows the connection of the Bluetooth module that allows you to talk hands-free with your phone through the car's audio system. Key Features for Xcarlink interfaces: Perfect CD quality Sound This is not an FM transmitter and does not transmit FM radio signals to your radio like other products on the market. Instead it connects directly to the CD changer port on your original car stereo to give you the best possible DIGITAL sound quality. Control your music files through your existing car stereo controls and Steering Wheel With the xcarlink you can perform all functions that you would normally use with your Car CD player to control your imp3/wma files.

– I do not have a Facebook account though. Thanks for your kind response. Best regards, Gerhard.

In the periphericals, i see well “STM Device in DFU Mode” under USB controlers (2 files are in details: “C: Windows system32 DRIVERS klfltdev.sys (from Kaspersky Lab ZAO) and C: Windows system32 drivers STTub30.sys (from STMicroelectronics version 3.0B) The RT3 Firmware is D013.009, CPS 1.30. Is my problem linked to the Program Radio password? Is there a default password to be entering here? Thank you in advanced for your answers Chris. Dear Zoe, thank you for sending the new Firmware for my RT3. Before updating it was D002.034, CP vers.

Not everyone has a Facebook account. Together the project can be improved. Maybe you will pass these suggestions to the programmers. Thank you for your attention. Would you please send me the latest firmware for my RT8 VHF GPS? Thank you very much.

You could Like and follow our Facebook Page to Get more Retevis services and special offers. Now let’s see how to download and update the latest Firmware below — Firmware Update Contents 1.Add side key to transmit 1750. 2.Fix machine crashes of some new radio LCD screens more stably. Firmware Update preparations 1.Know your vocoder versions. And that’s why your radio kept repetitive starting when you choose the unmatched version.See how to check about it below: Open your radio,Click “Utilities”–”Radio Infor”–”Versions”.

These speedcams work on PSA RT4, RT5, RT6, SMEG, SMEG+, SMEG IV2. WIP Com / Connect Com (RT4/RT5) with SW 8.1 or higher WIP Nav / Connect Nav WIP Com 3D / Connect Com 3D WIP Nav + / Connect Nav + Touch Screen 208 1.

Hey Zoe, first of all – thanks for the fast and professional replay by sending full rt3 & rt8 firmware packages within 12h – phantastic service – the big Japanes and German competitors could learn a lot from you and your company. Also your patience with the, sometimes stupid hamradio geeks is really nice.

Thank you in advanced for your answers Chris. Dear Zoe, thank you for sending the new Firmware for my RT3. Before updating it was D002.034, CP vers. V01.30, afte updating it is D003.008, CP vers.

These should all be updated, in addition to the extensive list of points of interest. For this new update, for example, more than 35,000 roundabouts, 34,000 street names, 19,000 one-way streets and turn restrictions 235,000 added or changed. Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections.

– Please send me the latest USB driver for my system which a description how to install. As it appears critical, maybe the description also tells me how plug and unplug the RT-8 for programming. Is there a way to reset the RT-8? – Please provide a description.

So just re-download the suited one to update again it’ll be fine. Dear Zoe, I just received my RT3. I download and installed the CPS 1.30 and USB driver on Windows7, but when connecting to the PC, there is no way to read or write CPS paramters to the RT3.

The map updates are new roads, junctions, ring roads, interchanges and millions of other changes included. Each road section has up to 260 characteristics, such as the number of lanes or information on one-way roads. These should all be updated, in addition to the extensive list of points of interest. For this new update, for example, more than 35,000 roundabouts, 34,000 street names, 19,000 one-way streets and turn restrictions 235,000 added or changed. Moreover, there is updated more than 835,000 kilometers of roads, including about 610 highway sections. IMPORTANT: Only compatible with correct software version. How do you know if you have the correct software version?

How do you know if you have the correct software version? 1) Turn on the device 2) Press the MENU button until the extended menu 3) Select DEVICE DESCRIPTION 4) The software version is displayed If your software version exceeds 5.5 or 6.6, then update the software.

Hi Zoe, I have a new RT-3 with Firmware ver: D013.020, and CP ver: V01.32. I have noticed while scanning analog channels, the radio behaves like I have priority scan set (transmissions are interrupted for about 0.5 seconds every 2 seconds). I have not set priority scan at all.

– I do not have a Facebook account though. Thanks for your kind response. Best regards, Gerhard.

Thank you for your attention and support. Dirk from Germany (RT8 VHF GPS, 13.32) Hi Zoe, I have a few suggestions for improvement. A current problem is that the warning tone volume can not be changed. It would be good if at least 2 or 3 volumes were possible. But also the display brightness should be adjustable. It’s just too light in the dark.

Do you have an updated USB driver version for WIN10 systems (64bit)? – Please send me the latest USB driver for my system which a description how to install. As it appears critical, maybe the description also tells me how plug and unplug the RT-8 for programming.

Dear Zoe, thank you for sending the new Firmware for my RT3. Before updating it was D002.034, CP vers. V01.30, afte updating it is D003.008, CP vers. Afte the update-process I started the RT3 Radio Program Software (my current Version is 1.30.0) but in the Menu ‘Buttons Definition’ I can’t see the Option 1750Hz so I tried the Radio Program Software for the RT8 and activated the 1750Hz-option for the upper side button. After writing back the new configuration to my RT3 still does not work. Could it be, that the 1750 Hz-feature is working only on the RT8?

With the programming software it is possible to assign the 1750 Hz. Function to the side buttons, but independent how to use – before – while – after pushing PTT button no tone appear in a second device on any mode ( digital / analog ). Actually i believing on two possibilities: a.) the problem sits in fron of the device and it`s not able to find the right using advices in internet and manual. B.) the hardware of rt3 is not able to generate a 1750 Hz tone and software feature is only for rt8 type, It would be phantastic to get your confirmation of a or b or better you know a solution c and would like to advise me and probably some other rt3 users how to do! Greetings from Germany to China.

If your system is not updated, we advise you to order this version Download: RT3 2016-2017 Italy.iso RT3 2016-2017 Scandinavia.iso RT3 Central Europe 2016-2017.iso RT3 Eastern Europe (North-East) 2016-2017.iso RT3 Eastern Europe (North-West) 2016-2017.iso RT3 Eastern Europe (South) 2016-2017.iso RT3 FRANCE 2016-2017.iso RT3 GERMANY 2016-2017.iso RT3 GREAT BRITAIN – IRELAND 2016-2017.iso RT3 SPAIN – PORTUGAL 2016-2017.iso TR3benelux17-16.rar Download from here.

The update 2016-1 = 2016 — update 2016-2 = 2016-2017 there is nothing wrong. The new maps are working from firmware version 2.2xx you don’t have to place newer firmware if it is working. If you have a Iphone then you need to update the firmware if you want not to have echo on bleuthoot. If you want to see witch firmware you have Start the car wait that the system is ready for use. Press the set-up button at least for 3 seconds Touch car diagnostic you see in the first screen the version firmware that you have. Rneg 2.x.xxx Compatible Car Models: To install the maps, you will need an activation code, which i can provide, i will need your car’s chassis number to get you the code. Any questions please send me a message.